VANSPORTS

VANSPORTS.DE Full bumper | first-class workmanship made of GRP plastic | suitable for the Sprinter 906 from model year 2006 to the end of production. The scope of delivery includes detailed installation instructions, installation accessories and a parts certificate in accordance with § 19 (3) No. 4 StVZO for the installation of vehicle parts. Please note! The delivery time can be 10 - 14 working days

This front spoiler lip is ideal for all standard Vito 447 series vehicles manufactured from 2014 onwards. The scope of delivery includes detailed installation instructions, installation material and a TÜV parts certificate for the installation of vehicle parts in accordance with § 19 (3) No. 4 StVZO.

Protect your vehicle with Protect 1 - stainless steel side skirt tubes (2 pieces) with a diameter of 63 mm (left and right), including brackets. These are suitable for a wheelbase of 3,200 mm. Please note: Installation on vehicles with the AMG look package or side skirts already fitted at the factory is not possible. The scope of delivery includes detailed installation instructions, installation material and a TÜV parts certificate for the installation of vehicle parts in accordance with § 19 (3) No.4 StVZO.

Made from 4 mm thick aluminum, this product is specially designed for Mercedes-Benz Vito and V-Class models (type 447) from model year 2015. It is only suitable for all-wheel drive vehicles (4 x 4) with 7 or 9-speed automatic transmission. Please note that the underride guard is not designed for use on rough terrain. Installation is simple and only requires bolting. You should allow around 1.5 hours for installation. The scope of delivery includes installation instructions, installation material and a clearance certificate. TÜV registration is not required for this product.

The KIRUNA alloy wheels in matt black have a robust off-road look. They measure 7.5 J x 18, have a bolt circle of 5x112 and an offset of 48. The load capacity is an impressive 1,000 kg. These rims are specially designed for the Vito and V-Class 447 models. A TÜV parts certificate is included. Please note: The wheel/tyre combination shown (235/55R18 A/T) is only permitted in conjunction with a speedometer calibration kit (item number 44754610 available in our store) and individual approval by the TÜV.

Raise the ground clearance of your vehicle with our bad road suspension springs and extended rear axle shock absorbers (2 pieces). They provide a ride height increase of approximately 30mm. These springs are ideal for all Citan and T-Class models in the 420 series with a short wheelbase. A TÜV parts certificate in accordance with §19 StVZO for vehicle approval is included in the scope of delivery. By installing our suspension springs, it is possible to use a larger wheel/tyre combination. The attached pictures illustrate a T-Class (Citan) equipped with our bad road suspension lift kit, SOLID mudguard kits and KRONA off-road rims with AT tires 225/50 R18 (including speedometer kit).

The offset bracket from VANSPORTS is ideal for 27.5" MTB Plus tires and suitable for tire widths from 2.6 to 3 inches. It is perfectly designed for the SECUFIX mounting bracket.

This set contains 3 door sill trims in VA design, which are anodized and fitted with non-slip strips. The package includes installation instructions and the required installation adhesive.

Set of pedal pads for VW T5. We are selling the last sets of parts! Reproduction is not planned. The scope of delivery includes the installation material, detailed installation instructions and a TÜV certificate for entry in the vehicle documents. The pedal pads are safety-critical components and must therefore be checked by an expert after installation.

Provided with a matt black powder coating and a wheel mount for bolting. Please note: When fitting a rear carrier with a spare wheel, the (electric) function of the tailgate can only be used to a limited extent. The spare wheel canister including holder (left) and the rear luggage carrier are not included in the scope of delivery of the spare wheel holder. The luggage rack for the rear is a separate product that must be purchased separately.

The suspension springs for raising the ride height +30 mm compared to the standard vehicle are ideal for all Vito and V-Class vehicles in the 447 series, including all-wheel drive, front-wheel drive and rear-wheel drive. Please note the maximum axle loads listed in your vehicle registration document: 1,550 kg for the front axle and 1,750 kg for the rear axle. By fitting these suspension springs, it is possible to use larger wheel/tyre combinations. Please note, however, that fitting the lift springs places a greater load on the drive shafts and drive shafts, which may shorten their service life. After installation, a vehicle measurement is required in accordance with Mercedes-Benz guidelines. Proof of this measurement is part of the TÜV parts certificate included in the scope of delivery. After installation of the lift springs, a vehicle demonstration with vehicle approval in accordance with §19 StVZO is also required. The attached pictures show a V-Class (Vito) with installed lift suspension kit and PROTECT 1 side sill tubes, as well as FIVE rims with AT tires 235/60 R17 (including speedometer kit).

A robust aluminum rim, ideal for high axle loads. A TÜV parts certificate, especially for Vito and Viano (model 639), is included in the scope of delivery.

Discover the VANSPORTS loading sill, specially designed for the Citan and T-Class (420 series). It is made of robust aluminium and has a silver matt, anodized aluminium surface. It is also equipped with non-slip PU strips. It is simply attached to the rear bumper. The necessary adhesive material and installation instructions are included in the scope of delivery.

The LED lamps in PU inserts (matt black) are specially designed for installation in the bumpers of Mercedes-Benz vehicles. They serve as a supplement to the Intelligent Light System (LED headlights) and cover the "dead installation space" in the lower area on the left and right. They are usually accepted as additional daytime running lights. Please note: Specialist knowledge is required for the electrical connection of the LED lamps. It is strongly recommended that the installation is carried out by a specialist workshop.

The set of AluStripes door sill trims consists of 2 or 3 parts and is made of tread-resistant aluminum sheet. It is anodized and has a brushed VA look, complemented by anti-slip rubber strips. The scope of delivery includes assembly instructions and the necessary assembly adhesive. It is very easy to fit by gluing.

VanSports aluminum pedal covers: Sporty improvement for the Citan 415 Quality aluminum with optimized grip Specially adapted for an ideal fit Increases comfort, safety and performance Simple installation by drilling and screwing Practical and aesthetic design Gives the interior a dynamic look

Made from robust ABS plastic Suitable for vehicles built from 2014 onwards Includes detailed installation instructions and the necessary mounting accessories A TÜV parts certificate in accordance with § 19 (3) No. 4 StVZO for the installation of vehicle parts is included in the scope of delivery

Lowering springs for the chassis Suitable for all Vito and V-Class models in the 447 series Also suitable for 4x4 vehicles. Important! Please observe the maximum axle loads specified in the vehicle registration. Front axle 1,550 kg, rear axle 1,750 kg A corresponding TÜV parts certificate for vehicle approval in accordance with §19 StVZO is included in the scope of delivery.