VANSPORTS

HARTMANN SP STREAM side skirts (left and right) XS ABS side skirts for adhesive and screw mounting on the standard Sprinter side skirts [BM 907 and 910] from model year 06/2018, Scope of delivery includes mounting material, TÜV parts certificate and mounting instructions. Installation is simple by gluing and screwing, the installation time is approx. 60 minutes. Note: Only suitable for chassis with driver's cab, e.g. motorhomes and flatbed vehicles.

This wheel is compatible with the Vito and V-Class 447 series. It is an alloy wheel in a 20-spoke design and comes in a deep, high-gloss black. The available sizes are 18-inch, 19-inch and 20-inch [fitting the 20-inch size is only possible in our workshop]. It is suitable for various tire types and can also be fitted to 4x4 vehicles. A TÜV parts certificate for Vito and V-Class (model 447) is included in the scope of delivery. The attached picture shows the rim in the 20-inch size

Perfect for Mercedes-Benz V-Class/Vito 447 This kitchen pull-out (load capacity up to 100 kg) comes with a gas hob, a cutlery drawer, a storage shelf and a chopping board. You can optionally add a 2-burner gas hob from Primus and a 5 l fresh water canister. A storage flap (65 x 46 x 32 cm) is also included. The pull-out for the cool box measures 60 x 41 x 32 cm. The fastening material for the Mercedes-Benz rail system is included in the scope of delivery.

The VP Spirit GRP side skirt set (left and right) for Mercedes-Benz Vito and V-Class, especially for a wheelbase of 3,430 mm (extra long), is a unique product. The scope of delivery includes detailed installation instructions, the necessary installation material and a TÜV parts certificate in accordance with § 19 (3) No.4 StVZO, which is required for the installation of vehicle parts. Please note that this is a custom-made product and the delivery time is between 5 and 10 working days.

This product is ideal for Sprinters produced from June 2018. With a 10 double-spoke design and a size of 9Jx20", ET47, it is designed for axle loads of up to 1,850 kg. It is also possible to use it for single loads of up to 2,000 kg. This product is specially designed for the Sprinter 907. It can carry a permissible total weight of up to 3,500 kg, but with a restriction on the rear axle load. It is ideal for panel vans and estate cars, and can also be used to a limited extent for leisure vehicles. A TÜV parts certificate is included in the scope of delivery. If you have any questions or uncertainties, please do not hesitate to contact us. We are also available by telephone. If you would like a complete wheel offer with tires and possibly with a tire pressure sensor, please send us an e-mail or contact us.

The HARTMANN front spoiler lip SP Stream is a PU rim front spoiler lip that is suitable for installation under the Sprinter front apron [BM 907 / 910] from model year 06/2018. The scope of delivery includes mounting plates, mounting material, a TÜV parts certificate and mounting instructions. Installation is simple by gluing and screwing, and takes about an hour.

The "CP Stream" side skirts from VANSPORTS have been specially developed for the Mercedes-Benz 420 Citan and T-Class models. These PU-Rim side skirts are designed for mounting under the original side skirts and can be attached to the vehicle without drilling. The scope of delivery includes detailed installation instructions, installation material and a parts certificate in accordance with § 19 (3) No.4 StVZO for the installation of vehicle parts. The side skirts come in "black plastic" and must be painted before installation.

This product is suitable for all standard V-Class vehicles, model 447 (not suitable for AMG optics package) manufactured between 2014 and model year 2019. The scope of delivery includes detailed installation instructions and the necessary installation material. A TÜV parts certificate in accordance with § 19 (3) No. 4 StVZO for the installation of vehicle parts is also included.

Stone chip and branch deflectors 4-piece wheel arch extensions for the Mercedes-Benz Sprinter (model series 907) High-precision ABS add-on parts in manufacturer quality, for fitting to the wheel arches / mudguards of the Sprinter No painting costs, as the wheel arch extensions are supplied in the surface color "black structure". Simple installation by gluing. Assembly time approx. 1 hour The required installation accessories and installation instructions are included in the scope of delivery. A TÜV parts certificate for the Sprinter (model 907) is also included.

Perfectly suitable for all V-Class (BM 447), Viano (BM 639) and Vito (BM 447 and BM 639) vehicles equipped with a seat rail system. The SECUFIX serves as a support during loading and additionally secures your motorcycle with straps during transportation.

With the speedometer calibration set for Mercedes Sprinter 907, you can correct the speed display in the event of a tire change with a deviation of >1%. The scope of delivery includes installation instructions and approval from the Federal Motor Transport Authority. Please note: This set is not suitable for vehicles without the factory code XJ4 (modification year G4-I) and without GSR II assistance systems. Please note: With a deviation of >2%, the speed display of the cruise control can vary by up to 10 km/h. Please specify the desired deviation in percent (%) when ordering. Alternatively, you can also specify the current and desired tire type.

The KRONA 1 alloy wheel in elegant matt black and with a 5-spoke design is a real eye-catcher. Its size is 8J x 18 ET45 and is suitable for wheel size 225/50 R18. Please note: It is necessary to adjust the wheel rolling circumference and to raise the vehicle. The scope of delivery includes wheel mounting bolts and a comparative report, which contains all the relevant information for the required individual approval.

The SP Stream underbody rear skirt, especially for the Sprinter 907, comes in a 6-piece set. It consists of a PUR rear center section and an ABS rear center panel, as well as rear corners and rear sills. These are intended for installation under the standard Sprinter BM 907 components manufactured from June 2018. Installation is carried out by gluing and screwing, which takes around 90 minutes. The scope of delivery includes the installation material, a TÜV parts certificate and installation instructions. The installation of a trailer coupling is possible without any problems.

Made from ABS plastic Suitable for vehicles built from 2014 onwards Comes with detailed installation instructions and mounting accessories A TÜV parts certificate in accordance with § 19 (3) No. 4 StVZO for the installation of vehicle parts is included in the scope of delivery

The front apron attachment fits your Mercedes-Benz Vito perfectly. This high-precision PU-Rim add-on part in manufacturer quality is simply fitted to the original Vito front apron. Installation is uncomplicated and is carried out by gluing and screwing. The estimated installation time is around 1 hour. The scope of delivery includes the required installation material, installation instructions and a TÜV parts certificate for registration in the vehicle documents.

Material: First-class PU-Rim Fastening: Glued and screwed under the original front apron Approval: With TÜV parts certificate Front spoiler lip, - also suitable for vehicles with AMG Line, parts certificate and mounting accessories

This product is suitable for Sprinter from June 2018. Dimensions: 8.5Jx19", ET50 It can carry axle loads of up to 1,900 kg It fits Sprinter 907, with a maximum permissible gross weight of 3,500 kg It is ideal for panel vans and estate cars, and under certain conditions also for campers and motorhomes A TÜV parts certificate is included in the scope of delivery. Please note: The rim size in the picture differs. The picture shows a 20 inch rim. If you would like a complete wheel offer with tires and possibly with a tire pressure sensor, please send us an e-mail or contact us.

The VANSPORTS VEST 2 alloy wheel in glossy black with a polished front is a real eye-catcher. It is characterized by its 10 double-spoke design and has the size 9Jx20", ET47. This wheel is designed for axle loads of up to 2,000 kg and fits vehicles from the 906 and 907 series as long as the permissible total weight does not exceed 3,500 kg. Please note the rear axle load restriction! It is suitable for panel vans and estate cars as well as for leisure vehicles to a limited extent. A TÜV parts certificate is included in the scope of delivery. If you would like a complete wheel offer with tires and possibly with a tire pressure sensor, please contact us by e-mail or speak to us directly.