EQE V295 (04/22- )

Fulfill your requirements with new energy: Our compact charger has been specially developed for Mercedes-Benz and is state of the art. With the fully automatic 4-stage charging process, it can "revive", charge, test and maintain the charge of discharged batteries. It delivers the correct voltage and charging current to ensure maximum service life. In addition, the system is protected against sparks, short circuits, reverse polarity and water jets (IP65) to protect the on-board electronics from damage. Our charger is suitable for 12 V lead-acid batteries and 12 V lithium batteries up to max. 120 Ah and is easy to operate. It is ideal for seasonal or showroom vehicles so that you are ready to go again quickly - typical Mercedes-Benz.

After intensive and long-term use, the ear and head pads of your headphones may become worn. In addition to hygienic reasons, replacing these pads can also offer a significant acoustic advantage. Over time, the synthetic leather of the pads inevitably wears down and dust or sweat can contaminate them. This can not only affect the wearing experience and comfort, but can also lead to noticeable changes in the sound. If the headphones no longer seal properly, this can affect the frequency response and thus the reproduction of bass and mids. Maintain the excellent sound experience and wearing comfort of your Mercedes-Benz Bluetooth® headphones with the original replacement pads. Replacing the pads is child's play by simply clicking them in and out.

Get the ultimate finish for your alloy wheels with a wheel hub cover from Mercedes-Benz. Thanks to its elegant design, it is a unique accessory that gives your vehicle a very special look. But that's not all: it protects the wheel hub from dirt and keeps it clean. Available in various designs and suitable for all Mercedes-Benz wheels, your vehicle will become a unique design statement.

Do you always have a drink within reach when you get thirsty? The exclusive Mercedes-Benz cup holder is just the thing for you! With flexible arms that ensure a firm hold and two compartments that accommodate standard container sizes, holding cans, cups and small bottles is no problem. The high-quality plastic is washable and dishwasher-safe, so you can also use the drinks holder for spontaneous storage of smaller items. In addition, the side panel of the cup holder can be retracted to extend the storage space in the center console or to facilitate access to the cell phone holder. Self-installation in the standard storage compartment of the center console is possible. With the Mercedes-Benz cup holder, you have everything under control!

The Mercedes-Benz Dynamic Load Balancing Kit 100A (DLB-Kit) enables more efficient and safer charging of your electrified Mercedes-Benz. It ensures safe balancing of power consumption between your charging station and other on-site devices, protects your grid connection from overload and enables efficient charging.Maximum safetyThe Mercedes-Benz DLB kit provides additional protection for your vehicle, your household appliances and the wallbox during the charging process. By continuously monitoring the building's power consumption in real time, the charging current is released to the wallbox when sufficient capacity is available. This prevents an increase in energy consumption and helps you save costs while you reach your maximum charging capacity.Settings of the DLB kitWith the Wallbox Installation App, you or your installer can easily set the threshold current levels. You gain insight into the energy consumption of your building as well as a transparent overview of your current charging current and charging history.InstallationThe DLB-Kit is connected via a cable connection between the control cabinet and wallbox. For a professional load management installation, please contact our installation partner in the respective country. The installation costs are not included in the purchase price, but you will receive a cost breakdown from our installation partner, who will be happy to check on site whether the Mercedes-Benz DLB-Kit can be installed in your meter box.Please note: The Mercedes-Benz DLB-Kit may only be installed by a qualified electrician or an installation partner and is not intended for installation by the end user. Please also observe the local rules and regulations.CompatibilityThe Mercedes-Benz DLB kit is designed for use with the Mercedes-Benz Wallbox and future Mercedes-Benz Wallboxes.

This fragrance invites you to smile!It reminds you of the velvety daisy from your childhood, when you were rolling in the grass and suddenly saw a daisy at eye level. The moment becomes perfect when you get your hands on a piece of fragrant dark chocolate. The fragrance could actually be called 'The Perfect Moment'.HEAD NOTES: bergamot, magnolia blossom oil, pink pepper, violet, green appleHEART NOTES: geranium, rose, lily of the valleyBASIC NOTES: musk, chocolate, ambergris

Whether you are traveling short or long distances, the safety of your little passengers should always come first. For this reason, the KIDFIX M i-SIZE, which has been specially designed and tested for Mercedes-Benz cars, is equipped with a variety of safety features to minimize the impact on the child in the event of an accident. The child seat has large, softly padded side bolsters for additional side protection, a rigid seat base, a stable belt guide and a particularly robust headrest attachment. These features offer additional safety, especially for older children who are already secured with a 3-point vehicle belt. In addition, the ergonomic headrest offers comfort when sleeping while driving. The seat can be used between approx. 3.5 and 12 years of age (approval according to R129 for children from 100 to 150 cm, 15 to 36 kg body weight), as the belt guide and headrest can be adjusted to the child's height. The V-shaped backrest of the KIDFIX M i-SIZE can be continuously adjusted to the angle of the vehicle seat to ensure a comfortable sitting position. The seat is forward-facing and has ISOFIX locking arms as standard, which facilitate safe and error-free installation and removal. The ISOFIT system ensures a secure connection between the vehicle and child seat even when the seat is unoccupied. The KIDFIX M-iSIZE is even suitable for use in Mercedes-Benz cars with a beltbag. If required, the backrest of the seat can be removed to use it as a booster seat. The child seat is made of high-quality, soft and padded materials, which can be removed and washed if necessary. 

The flexible loading system offers a practical and secure storage option for all components. The bag can be additionally secured with a carabiner on the side. Thanks to its flame-retardant properties in accordance with DBL 5307.10, the bag is safe and reliable. With a size of 57 x 37 x 14.5 cm (l/w/h) and a weight of 1.16 kilograms, the bag is light and compact.

All elements can be stored in the Flexible Loading System Pro bag in an optimal, safe and convenient way. With the carabiners on the side, the bag can be stored ideally and crash-proof. There are also additional compartments for adapters in the bag.- Flame retardant according to DBL 5307.10- Dimensions: 413 x 412 x 104 (length/width/height in mm)- Weight: 0.88 kilograms

The fusion of opposites creates a fascinating tension! AMG #63 exists in a world between the luxurious scent of sandalwood and the invigorating energy of ginger. Through a radical formulation, we focus on the essentials and embody the driving experience of an AMG in a fragrance. The highest quality meets the finest molecular technology in the selection of raw materials and is combined in a unique formula. The 6.3% perfume oil ensures maximum fragrance performance. Head: orange, ginger CO2 extract, clary sage, lavandin, galbanumHeart: jasmine, rose, heliotrope, peachBase: sandalwood, benzoin siam, ambergris, musk

With a wheel hub cover from Mercedes-Benz, you can give your light-alloy wheels an elegant finish. Not only beautiful to look at, but also functional: the covers protect the wheel hub from dirt and contamination. Choose from different designs and find the one that suits your Mercedes-Benz wheels. It's all about design - for your Mercedes-Benz.

The powdery accents come from the queen of sandalwood and are blended with spicy aromas.It undoubtedly claims the rank of a luxurious creation. It exudes stubbornness and arrogance. It is not about pleasing, but about seducing.Head notes: bergamot, citrus fruits, mandarin, galbanumHeart notes: freesia, carnation, jasmineBase notes: sandalwood, amber, spicy notes

Give your Mercedes-Benz wheels a stylish finish with a wheel hub cover from Mercedes-Benz. Not only a beautiful accessory, but also a practical one: the covers protect the wheel hub from dirt and are available in various designs to match all Mercedes-Benz wheels. Design is a linchpin at Mercedes-Benz.

The exclusive ashtray in Mercedes-Benz design is a practical and elegant accessory for the vehicle interior. The ashtray can be used in the cup holder or in the door compartment (depending on the model series) of the car and offers a large capacity, so that nothing stands in the way of enjoying a cigarette even on longer journeys. The integrated ember killer, the high-quality, heat-resistant material and the cigarette holder ensure safe protection. To empty and clean the ashtray, the upper section can be opened by turning it. The ashtray is available in black and is 12.2 cm high, with a diameter of 6.7 cm at the bottom and 8.4 cm at the top. With its attractive Mercedes-Benz design, the ashtray ensures that the interior of the vehicle remains clean and free of ash residue.

Our floor mats are the epitome of quality and durability. They are designed to retain the same color fidelity and odor characteristics even after several winters. Each individual model is precisely tailored to the dimensions of your Mercedes-Benz, as they are manufactured on the basis of your vehicle's CAD computer data. Thanks to a clip fastener, the mats are also secured to the vehicle floor without slipping.

Preparation for remote online services in the Mercedes me app ***With the Mercedes me app, charging processes can be conveniently controlled via smartphone. You receive information about the charge status and a clear overview of your charging history. The wallbox is simply connected to the Internet via the customer's own WLAN or LAN.Safety comes firstThe integrated components (6 mA DC fault current detector) offer additional protection for the vehicle, the house installation and the wallbox during the charging process. The Mercedes-Benz Wallbox can be unlocked or locked via the app or RFID card to prevent unauthorized use.****Over-the-air updatesThe Mercedes-Benz Wallbox has the technical capability to receive "over-the-air" software updates via the customer's own WLAN or LAN. This allows you to receive new functions for integrating the Wallbox into an energy management system in the future. To receive the over-the-air updates, you need the Mercedes me app. In this app, you must agree to the respective update or you can set the automatic installation of updates in the Mercedes me app.***InstallationCheck now with our Mercedes-Benz Wallbox Pre-Check how well you are prepared for charging at home. If you are interested in a professional wallbox installation, please contact our installation partner in the respective country. The installation is not included in the purchase price, but you will receive a cost overview for the installation from our installation partner, who will also be happy to check at your location whether a wallbox can be installed at your home. An Internet connection via LAN or WLAN is required for installation. You will receive further information after purchasing the wallbox or from your local Mercedes-Benz dealer.Please note: The Mercedes-Benz Wallbox may only be installed by persons with the appropriate specialist training and is not intended for installation by the end consumer. Please also note the

The MB Bluetooth® headphones can be transported safely and conveniently in the carry case. The case is equipped with an additional compartment for the AUX cable and the charging cable and offers an optimum fit. Thanks to the reinforced walls, reliable storage is guaranteed.

The miniature model of the new EQE impresses as a high-precision replica of the original and reveals the focus on value, design and pioneering electromobility in every detail, no matter how small. This model car is based on the original CAD data of the EQE and impresses with its paintwork in an authentic color tone and the faithful representation of all interior details. With details such as Electric Art Exterior, Electric Art Interior, MULTIBEAM LED, panoramic roof, flush door handles, MBUX Hyperscreen and light-alloy wheels in 5-twin-spoke design, the model is mounted on a printed base and comes in Mercedes-Benz design layout packaging. With a length of approx. 11.5 cm, it is hand-assembled from die-cast zinc and plastic parts from over 45 individual parts, made for Mercedes-Benz by Herpa. It is not suitable for children under 14 years of age and is part of the Mercedes-Benz Collection and Model Car Selection cars.